Headlight Film Green

Protect and Renew with Protective

Film for Headlights Discover the headlight film: an invisible barrier that protects against scratches, erosion, and yellowing due to aging. Improve the safety and aesthetics of your vehicle with lasting and reliable protection, as it allows the restoration of the original conditions of the headlight. Versatility, Innovation, and Quality Complete Adaptability: Ideal for every type of headlight, fog lights, side position lights, or parts made of transparent plastic or Lexan, ensuring complete and universal protection.

Extended Use: Beyond automotive, it is perfect for home applications or other environments, protecting smooth surfaces from damage and wear. Does Not Fade: Made with high-quality materials that resist wear and aging due to sunlight, preserving the transparency and effectiveness of the material over time. Superior Resistance: Thanks to its exceptional resistance to scratches and abrasions, it keeps the headlights protected in all conditions. Ease of Use and Maintenance Simple Installation: The film is stretchable and moldable, fitting perfectly to the shapes of your headlight without creating bubbles or wrinkles. Simple Removal: Designed to be easily removed without leaving residues, allowing for simple and quick replacement. Film Protection The film is completely protected in turn by films that protect the inner side to ensure the functioning of the adhesive for installation and residue-free removal, the outer side provides protection from possible scratches during application, not to mention once installed, protection from sunlight that ages all types of plastic, from the harshest weather conditions, keeping the headlights always bright and functional. Preparation Headlight Cleaning: Ensure that the headlights are completely clean, dry, and free from any residue, oil, or dirt. Clean them with a soft cloth soaked in isopropyl alcohol or glass cleaner. Preparation of the Environment: Install the film in an enclosed environment to avoid dust, wind, and other elements that could compromise the application. Measurement and Cutting: If necessary, measure and cut the protective film according to the dimensions of the headlight, leaving a small extra margin around the edges. Application of the Solution: Spray a generous amount of soapy water solution on the headlights and the adhesive side of the film. This will allow you to move and position the film easily. Positioning the Film Positioning the Film: Gently remove the backing of the film and apply it to the headlight. Use your fingers or a plastic spatula to position it correctly, ensuring that it adheres well and without air bubbles. Smoothing the Film: With the plastic spatula, start from the center of the film and work towards the edges, smoothing out all air bubbles and wrinkles. Spray more soapy solution if necessary to facilitate the spatula's sliding. Drying and Heating: Once the film is correctly positioned, use a hairdryer or a low-temperature heat gun to help the film conform to the curves of the headlight and adhere better. Do not overheat the film. Trimming Excess Edges Trimming the Edges: If necessary, carefully trim any excess film using a utility knife. Be sure to leave a small edge to ensure complete coverage. Final Check: Inspect the headlight to ensure the film is smooth, without air bubbles or wrinkles. Use the spatula to smooth out any small remaining bubbles. Final Tips After application, avoid washing the car for at least 24 hours to allow the film to dry completely. If air bubbles or wrinkles appear in the following days, it is possible to slightly heat the area and smooth the film. With these instructions, you should be able to correctly apply the protective film to your car's headlights, ensuring lasting protection and enhancing the aesthetics of your vehicle.